Icom IC-7700 - External Display; Opening Message

12-11
12
SET MODE
MN–Q Popup (MN OFF ON) ON
Enables the pop-up display capability for the notch
filter width when the manual notch filter is turned
ON. (default: ON)
Screen Saver Function 60min
Turns the screen saver function ON (15, 30 or 60
minutes) and OFF. (default: 60 minutes)
The screen saver will activate when no operation is
performed for the selected time period to protect the
LCD from the “burn-in” effect.
Screen Saver Type Bound
Selects the screen saver type from “Bound,” “Rota-
tion” and “Twist.” (default: Bound)
The screen saver pattern can be displayed for your
referencewhileholdingdown[PREVIEW]
F-5
.
External Display OFF
Select“ON”whentheexternaldisplayisconnected.
(default: OFF)
•Atleast800×600pixelresolutionisrequiredforthedis-
play.
External Display Sync Pulse H
Selectsthesuitablepulselevelfortheconnectedex-
ternal display from H and L. (default: H)
Opening Message ON
Turns the opening message screen display capabil-
ity ON or OFF. (default: ON)
My Call
Setstheintroductorytext,upto10-characterlong,
displayed in the opening screen.
Usually, you set your call sign for the opening
screen.
Capital letters, small letters, numerals, some sym-
bols (– / . @) and spaces can be used.
z
Push [EDIT]
F-5
to select the name edit condi-
tion.
 •Thecursorunderthe1stcharacterblinks.
x Push [ABC] (MF6), [abc] (MF6), [123] (MF7) or
[Symbol]
(MF7) to select the character group, then
rotate the main dial to select the character.
 •Push[ABC](MF6) or [abc] (MF6) to toggle capital and
small letters.
 •Push[123]
(MF7) or [Symbol] (MF7) to toggle numer-
als and symbols.
 •Push[t]
F-1
or [u]
F-2
for cursor movement.
•Push[DEL]
F-3
to delete the selected character.
 •Push[SPACE]
F-4
to input a space.
 •Pushingthetransceiver’skeypad,[0]–[9],canalso
enter numerals.
c Push
EXIT/SET
to set the name.
■ Display set mode (continued)