Icom IC-7700

3-11
D Meter type selection
A total of 3 meter types are available in the IC-7700—
Standard, Edgewise and Bar meters.
Follow the instructions below for the meter type selec-
tion.
q Push
EXIT/SET
several times to return to normal
screen, if necessary.
w Push [SET]
F-7
, then push [DISP]
F-3
to select
display set mode.
e Push [Y]
F-1
or [Z]
F-2
to select “Meter type
(Normal Screen)” item.
r Rotate the main dial to select the desired meter
type from “Standard,” “Edgewise” and “Bar.”
t Push
EXIT/SET
toexitdisplaysetmode.
• Edgewise meter
• Bar meter
3
BASIC OPERATIONS
The IC-7700 has a built-in voice synthesizer to an-
nounce the frequency, mode, etc. (S-meter level
can also be announced—p. 12-15) in clear, elec-
tronically-generated voice, in English (or Japanese).
➥ Push
SPEECH
to announce the currently se-
lected frequency, etc.
 •Holddown
SPEECH
for 1 second to additionally an-
nounce the selected mode.
➥ Pushing a mode switch also announces the ap-
propriate mode. (p. 12-15)
The output level of the voice synthesizer can be
adjusted in level set mode. (p. 12-6)
■ Voice synthesizer operation
EXIT/SET
F-7
SET
F-3
DISP
F-1
∫
F-2
√
S
Po
1 3 5 7
9
250W200100 150500
+
20
+
40
+
60dB
S
Po
1 3 5 7 9
25 0W20 010 0 1 5050 0 10
+
20
+
40
+
60dB
SPEECH