Icom IC-7700 - VFO;Memory Mode and Selection

■ VFO selection
VFOisanabbreviationofVariableFrequencyOscil-
lator, and is commonly referred to as a main tuning
function.
Themaindialisoftencalledthe“VFOknob.”
D Selecting VFO-A/VFO-B
➥InVFOmode,push
A/B
totoggleVFO-Aand
VFO-B.
 •“
VFO-A
” or “
VFO-B
”appearswhenVFO-AorVFO-Bis
selected, respectively
D VFO equalization
➥InVFOmode,holddown
A=B
for 1 second to
settheundisplayedVFOfrequencyandmodeto
thoseofthedisplayedVFO.
 •ThreebeepssoundwhentheVFOequalizationiscom-
pleted.
3-3
3
BASIC OPERATIONS
■ Selecting VFO/memory mode
➥ Push
V/M
toswitchbetweenVFOandmemory
modes.
 •“
VFO-A
” or “
VFO-B
”appearswheninVFOmode,orthe
selected memory channel number appears when in
memory mode.
•Holdingdown
V/M
for 1 second transfers the con-
tentsoftheselectedmemorychanneltoVFO.(p.8-4)
V/M
“VFO” indicator
Memory channel
number
A/B
A=B