Icom IC-7700 - Daily Timer Settings

11-3
■ Daily timer setting
The transceiver turns power ON and/or OFF automat-
ically on the specified day and time, with the specified
frequency settings.
q Push
EXIT/SET
several times to close multi-function
screen, if necessary.
w Hold down
TIMER
for 1 second to select timer set
screen.
e Push one of [TIMER1]
F-1
to [TIMER5]
F-5
to
select the desired timer.
r Rotate the main dial to select the timer action ON
or OFF.
t Push [u]
F-2
to select the “DAY” cell, then rotate
the main dial to select the desired day of the week.
  •Select“–––”nottospecifythedayoftheweek.The
timer will function every day in this case.
  •Onceadayoftheweekisselected,push[CLR]
F-4
to
select “– – –.”
y Push [u]
F-2
to select the “REPEAT” cell, then
rotate the main dial to select the repeat function
ON or OFF.
 •ON :Thetimerfunctionseveryselecteddayofthe
week. (repeats)
 •OFF:Thetimerdoesnotrepeat.
u Push [u]
F-2
to select the “ON” cell, then rotate
the main dial to set the desired transceiver power
ON time.
  •WhenusingpowerOFFtimeronly,push[CLR]
F-4
to
select “– – –.” This setting cannot be set when the
power OFF timer is set to “– – –.”
i Push [u]
F-2
to select the “OFF” cell, then rotate
the main dial to set the desired transceiver power
OFF time.
  •WhenusingpowerONtimeronly,push[CLR]
F-4
to
select “– – –.” This setting cannot be set when the
power ON timer is set to “– – –.”
o Push [u]
F-2
to select the “Mch” cell, then rotate
the main dial to select the desired memory channel
number.
  •IfusingthecurrentlysetVFOcondition,push[CLR]
F-4
to select “– – –.”
!0 Push [SET]
F-7
to set the timer.
 •Thetimerindicatorabove
TIMER
switch lights green.
!1 Repeat steps e to !0 to set other timers, if desired.
!2 Push
EXIT/SET
toexittimersetscreen.
Main dial
≈
F-2
TIMER2
F-3
TIMER3
TIMER4
EXIT/SET
//
Ω
F-1
TIMER1
/
F-4
TIMER5
F-5 F-7
SETCLR
TIMER
11
CLOCK AND TIMERS