Icom IC-7700 - D Load Option Set Mode

12-25
12
SET MODE
Load Contents Select
Selects file load condition from All and Select.
(default: Select)
•All :Loadsandsetstheallfollowingcontents.
•Select:Loadsandsetstheselectedcontentsonly.
ANT Memory NO
Selects the antenna memory setting loading condi-
tion from YES and NO. (default: NO).
•YES :Loadsandsetstheantennamemory.
•NO :Usetheoriginalantennamemorysetting.
REF IN/OUT, REF Adjust NO
Selects the reference signal setting load condition
from YES and NO. (default: NO).
•YES :Loadsandsetsthereferencesignalset-
ting.
•NO :Usetheoriginalreferencesignalsetting.
Network Settings NO
Selects the Network settings loading condition from
YES and NO. (default: NO).
•YES :LoadsandsetstheNetworksettings.
•NO :UsetheoriginalNetworksettings.
CI–V Address NO
SelectstheCI-Vaddresssettingloadconditionfrom
YES and NO. (default: NO).
•YES :LoadsandsetstheCI-Vaddresssetting.
•NO :UsetheoriginalCI-Vaddresssetting.
Other Memory & Settings YES
Thissettingisfixed“YES.” •YES :Loadsandsetsmemorychannelcontents
and other settings.
Voice TX Memory YES
Selects the voice TX message load condition from
YES and NO. (default: YES).
•YES :LoadsandsetsvoiceTXmessage.
•NO :UsetheoriginalvoiceTXmessage.
Voice RX Memory NO
Selects the voice RX message load condition from
YES and NO. (default: NO).
•YES :LoadsandsetsvoiceRXmessage.
•NO :UsetheoriginalvoiceRXmessage.
D Load option set mode