Icom IC-7700 - RIT, AGC, and Noise Functions

5-11
5
FUNCTIONS FOR RECEIVE
■ RIT function
The RIT (Receive Increment Tuning) function com-
pensates for off-frequency operation of the received
station.
The function shifts the receive frequency up to
±9.99 kHz in 10 Hz steps without moving the transmit
frequency.
q Push
RIT
to turn the RIT function ON and OFF.
 •“
RIT
” and the tuned receive frequency appear when
the function is ON.
w Rotate the [RIT/∂TX] control.
 •Holddown
CLEAR
for 1 second to reset the RIT fre-
quency.
 •Push
CLEAR
momentarily to reset the RIT frequency
when the quick RIT/∂TX clear function is ON. (p. 12-15)
 •Holddown
RIT
for 1 second to add the shift fre-
quency to the operating frequency.
D RIT monitor function
When the RIT function is ON, holding down [XFC] al-
lows you to monitor the operating frequency directly
(RIT is temporarily cancelled).
✔ For your convenience — Calculate function
The shift frequency of the RIT function can be added/
subtracted to the displayed frequency.
➥ While displaying the RIT shift frequency, hold down
RIT
for 1 second.
[RIT/∂TX]
RIT
CLEAR
XFC