Icom IC-7700

12-24
12
SET MODE
SAVE Contents All
Selects file save condition from All and Select.
(default: All)
•All :Savesallthefollowingcontents.
•Select:Savestheselectedcontentsonly.
Memory & Settings YES
Thissettingisfixed“YES.” •YES :Savesmemorychannelcontentsandset-
tings of set modes.
Voice TX Memory YES
Selects the voice TX message save condition from
YES and NO. (default: YES)
•YES :SavesthevoiceTXmessage.
•NO :Doesnotsave.
Voice RX Memory NO
Selects the voice RX message save condition from
YES and NO. (default: NO)
•YES :SavesthevoiceRXmessage.
•NO :Doesnotsave.
SAVE Form Now Ver
Selects file saving format between “NowVer” and
“OldVer.”(default:NowVer)
Previous versions will be retained, and selectable in
“OldVer,” and indicated in brackets.
For your information:
The current IC-7700 firmware version number can
be confirmed when turning the power ON and is dis-
played in the bottom right corner of the function dis-
play, as shown below.
2.00
Firmware version number is displayed here
•NowVer :Savestheleinthe rmware version
format currently being used.
•OldVer :Savesthe le in the rmware version
format that is indicated in brackets.
NOTE: You cannot write setting file that is saved
in the current version format to an older firmware
version IC-7700.
D Save option set mode