Icom IC-7700

■ Frequency transfers
The frequency and operating mode in a memory
channelcanbetransferredtotheVFO.Frequency
transferscanbeperformedineitherVFOmodeor
memory mode.
D Transferring in VFO mode
This is useful for transferring programmed contents to
aVFO.
qSelectVFOmodewith
V/M
.
w
Select the memory channel to be transferred with
/ .
 •Memorylistscreenisconvenientforselectingthede-
sired channel.
 •Memorychannelcontentsappearinthememorychan-
nel readout (below the frequency readout).
 •“--.---.--”appearsiftheselectedmemorychannelisa
blank channel. In this case transferring is not possible.
e Hold down
V/M
for 1 second to transfer the fre-
quency and operating mode.
 •Transferredfrequencyandoperatingmodeappearon
the frequency readout.
D Transferring in memory mode
This is useful for transferring frequency and operating
mode while operating in memory mode.
When you have changed the frequency or operat-
ing mode in the selected memory channel:
•Displayed frequency, mode and filter setting are
transferred.
•Programmed frequency and mode in the mem-
ory channel are not transferred, and they remain
in the memory channel.
q Select the memory channel to be transferred with
/ in memory mode.
 •And,setthefrequencyoroperatingmodeifrequired.
w Hold down
V/M
for 1 second to transfer the fre-
quency and operating mode.
 •Displayedfrequencyandoperatingmodearetrans-
ferredtotheVFO.
eToreturntoVFOmode,push
V/M
momentarily.
8-4
8
MEMORY OPERATION
TRANSFER EXAMPLE IN VFO MODE
Operatingfrequency:21.320MHz/USB(VFO)
Contents of M-ch 16 : 14.018 MHz/CW
or
Hold down for 1 sec.
Beep
Beep
Beep
V/M
TRANSFER EXAMPLE IN MEMORY MODE
VFOfrequency  :21.320MHz/USB
Contents of M-ch 16 : 14.018 MHz/CW
Hold down for 1 sec.
Beep
Beep
Beep
Programmed contents appear.
V/M
∫
√
∫
√