Icom IC-7700

9-7
■ Setting select memory channels
D Setting in scan screen
q Push
EXIT/SET
several times to close a multi-func-
tion screen, if necessary.
w Select memory mode.
e Push [SCAN]
F-5
to select the scan screen.
r Select the desired memory channel to set as a se-
lect memory channel.
 •
∫
/
√
keys and direct keypad selections can be
used.
t Push [SELECT]
F-3
several times to set the mem-
ory channel as a select memory ★1, ★2, ★3 or not.
y Repeat steps r to t to program another memory
channel as a select memory channel.
u Push
EXIT/SET
toexitthescanscreen.
D Setting in memory list screen
q Push
EXIT/SET
several times to close a multi-func-
tion screen, if necessary.
w Push [MEMORY]
F-4
to select memory list
screen.
e Rotate the main dial while pushing [ROLL]
F-1
or
[SET]
F-2
to select the desired memory channel.
 •
∫
/
√
keys and direct keypad selections can be
used.
r Push [SELECT]
F-3
several times to set the mem-
ory channel as a select memory ★1, ★2, ★3 or not.
t Repeat steps e to r to program another memory
channel as a select memory channel.
y Push
EXIT/SET
toexitthememorylistscreen.
D Erasing the select scan setting
q Push
EXIT/SET
several times to close a multi-func-
tion screen, if necessary.
w Push [MEMORY]
F-4
to select memory list
screen, or push [SCAN]
F-5
to select scan
screen.
e Hold down [SELECT]
F-3
for 1 second to display
memory select all clear window.
r Push one of the following keys to clear all select
scan setting.
[★1]
F-1
: Clears all ★1 setting.
[★2]
F-2
: Clears all ★2 setting.
[★3]
F-3
: Clears all ★3 setting.
[★1,2,3]
F-4
: Clears all select setting.
t Push
EXIT/SET
toexitthememorylistscreen.
9
SCANS