Icom IC-7700

8-6
8
MEMORY OPERATION
■ Memory names
All memory channels (including scan edges) can be
tagged with alphanumeric names of up to 10 charac-
ters each.
Capital letters, small letters, numerals, some symbols
(! # $ % & ¥ ? " ’ ` ^ + – ✱ / . , : ; = < > ( ) [ ] { } | _
~
@)
and spaces can be used.
D Editing (programming) memory names
q Push
EXIT/SET
several times to close a multi-func-
tion screen, if necessary.
w Push [MEMORY]
F-4
to select memory list screen.
e Select the desired memory channel.
r Push [NAME]
F-4
to edit memory channel name.
 •Acursorappearsandblinks.
 •Memorychannelnamesofblankchannelscannotbe
edited.
t Input the desired character by rotating the main dial
or by pushing the keypad for number input.
 •Push[ABC]or[abc]totogglecapitalandsmallletters.
 •
Push [123] or [Symbol] to toggle numerals and symbols.
 •Push[t]
F-1
or [u]
F-2
for cursor movement.
 •Push[DEL]
F-3
to delete the selected character.
 •Push[SPACE]
F-4
to input a space.
 •Pushing thetransceiver’skeypad, [0]–[9],canalso
enter numerals.
y Push
EXIT/SET
to input and set the name.
 •Thecursordisappears.
u Repeat steps e to y to program another memory
channel’s name, if desired.
i Push
EXIT/SET
toexitmemorylistscreen.
✔ For your convenience
When a PC keyboard is connected to [USB] connec-
tor on the front panel, the memory name can also be
edited from the keyboard.
■ Memory clearing
Any unused memory channels can be cleared. The
cleared memory channels become blank channels.
q Select memory mode with
V/M
.
w Push [MEMORY]
F-4
to select memory list screen.
e Select the desired memory channel with
∫
/
√
.
r Hold down [CLR]
F-5
for 1 second to clear the
contents.
 •Theprogrammedfrequencyandoperatingmodedisap-
pear.
t To clear other memory channels, repeat steps e
and r.
Hold down for 1 sec.
Beep
Beep
Beep
(CLR)
F-5
F-5
CLR
Keypad
//
F-3
DEL
123 Symbol ABC abc
F-1
Ω
F-2
≈
F-4
SPACE