Icom IC-7700

8-2
■ Memory channels
The transceiver has 101 memory channels. Memory
mode is very useful for quickly changing to often-used
frequencies.
All 101 memory channels are tuneable which means
the programmed frequency can be tuned temporarily
with the main dial, etc. in memory mode.
■ Memory channel selection
D Using the
∫
/
√
keys
q Push
V/M
to select memory mode.
w Push
∫
/
√
several times to select the de-
sired memory channel.
 •Holddown
∫
/
√
for continuous selection.
 •[UP]and[DN]onthemicrophonecanalsobeused.
eToreturntoVFOmode,push
V/M
again.
D Using the keypad
q Push
V/M
to select memory mode.
w Push
F-INP
ENT
.
e Push the desired memory channel number using
the keypad.
 •Enter100or101toselectscanedgechannelP1orP2,
respectively.
r Push
∫
or
√
to select the desired memory
channel.
[EXAMPLE]
To select the memory channel 3;
- Push
F-INP
ENT
,
7
3
, then push
∫
or
√
.
To select the memory channel 12;
- Push
F-INP
ENT
,
1.8
1
,
3.5
2
, then push
∫
or
√
.
To select the scan edge channel P1;
- Pus h
F-INP
ENT
,
1.8
1
,
50
0
,
50
0
, then
push
∫
or
√
.
To select the scan edge channel P2;
- Pus h
F-INP
ENT
,
1.8
1
,
50
0
,
1.8
1
, then
push
∫
or
√
.
V/M
Y Z
Keypad
F-IMP
ENT
V/M
Y Z
8
MEMORY OPERATION
MEMORY
MEMORY
TRANSFER OVER-
CHANNEL
CHANNEL CAPABILITY
TO VFO WRITING
CLEAR
NUMBER
Regular memory
1–99 Yes Yes Yes
channels
Scan edge
memory P1, P2 Yes Yes No
channels
Independent transmit and
receive frequencies and modes
in each memory channel.
One frequency and one mode in
each memory channel as scan
edges for programmed scan.