Icom IC-7700

4-17
D Editing RTTY memory
The contents of the RTTY memories can be set using
the memory edit menu. The memory can store and
re-transmit 8 RTTY message for often-used RTTY
information. Total capacity of the memory is 70 char-
acters per memory channel.
• Programming contents
q During RTTY mode operation, push [DECODE]
F-3
to select RTTY decode screen.
w Push [TX MEM]
F-4
to select RTTY memory
screen, then push [EDIT]
F-6
to select RTTY
memory edit screen.
 •RTTYmemory contentsofChannel1(RT1)isse-
lected.
e Push [RT1..RT8]
F-7
several times to select the
desired RTTY memory channel to be edited.
r Push [t u]
F-5
to select between memory con-
tents and memory name.
t Push [ABC]
(MF6), [abc] (MF6), [123] (MF7) or
[Symbol]
(MF7) to select the character group, then
rotate the main dial to select the character, or push
the keypad for number input.
 •[abc](MF6) appears when [ABC] (MF6) is pushed when
“ABC” character group is selected, and [Symbol]
(MF7)
appears when [123]
(MF7) is pushed when “123” char-
acter group is selected.
•Selectablecharacters(withthemaindial);
✔ For your convenience
When a PC keyboard is connected to [USB] con-
nector on the front panel, the RTTY memory con-
tents can also be edited from the keyboard.
y Push [t]
F-1
or [u]
F-2
to move the cursor
backwards or forwards, respectively.
•Pushing[DEL]
F-3
deletes a character and
[SPACE]
F-4
inserts a space.
u Repeat steps t and y to input the desired char-
acters.
i Push
EXIT/SET
tosetthecontentsandexitRTTY
memory edit screen.
RT1..RT8
EXIT/SET
F-7
//
F-3
DEL
F-4
SPACE
123 Symbol ABC abc
F-1
Ω
F-2
≈
F-5
Ω ≈
4
RECEIVE AND TRANSMIT
• RTTY memory edit screen
• Pre-programmed contents
CH Name Contents
RT1 MYCALLx2 ↵DE ICOM ICOM K↵
RT2 MYCALLx3 ↵DE ICOM ICOM ICOM K↵
RT3 QSLUR599 ↵QSL UR 599–599 BK↵
RT4 DE+UR599 ↵QSL DE ICOM ICOM UR 599–599
BK↵
RT5 73 GL SK ↵73 GL SK↵
RT6 CQ CQ CQ ↵CQ CQ CQ DE ICOM ICOM ICOM
K↵
RT7 RIG&ANT ↵MYTRANSCEIVERISIC–7700
& ANTENNA IS A 3–ELEMENT
TRIBAND YAGI.↵
RT8 EQUIP. ↵MY RTTY EQUIPMENT IS
INTERNAL FSK UNIT &
DEMODULATOR OF THE
IC–7700.↵
Key selection Editable characters
A to Z (capital letters)
a to z (small letters)
(selectable for memory name only)
0 to 9 (numbers)
! # $ % & ¥ ? “ ‘ ` ^ + – ✱ / . , : ; =
< > ( ) [ ] { } | _
~
@
( For the memory contents set-
ting, ! $ & ? “ ‘ – / . , : ; ( ) ↵ are
selectable.)
abc
123
Symbol
ABC