Icom IC-7700

7-9
7
VOICE RECORDER FUNCTIONS
■ Recording a message for transmit
TotransmitamessageusingtheVoicerecorder,record
the desired message in advance as described below.
The IC-7700 has digital voice memories for transmis-
sion, up to 4 messages and you can record message
in length of up to 99 seconds.
D Recording
q Push
EXIT/SET
several times to close a multi-func-
tion screen, if necessary.
wPush[VOICE]
F-2
todisplaytheVoicerecorder
menu.
e Push [MIC REC]
F-2
to select the voice mic.
record screen.
r Push [Y]
F-1
or [Z]
F-2
to select the desired
message.
t Hold down [REC]
F-4
for 1 second to start record-
ing.
 •“
●REC
” indicator appears.
 •Speakintothemicrophonewithoutholdingdown[PTT].
 •Previouslyrecordedcontentsarecleared.
 •Audiooutputfromtheinternalspeakerisautomatically
muted.
y While speaking into the microphone with your nor-
mal voice level, adjust the [MIC] control so that the
[MIC-RECLEVEL]indicatorreadswithin100%.
u Push [REC]
F-4
momentarily to stop recording.
 •Therecordingisterminatedautomaticallywhenthere-
maining time becomes 0 second.
i Push
EXIT/SET
 twice to exit the Voice recorder
menu.
D Confirming a message for transmit
q Perform the steps q to e as “D Recording” above.
w Push [Y]
F-1
or [Z]
F-2
to select the desired
message.
e Push [PLAY]
F-3
to playback the recorded con-
tents.
 •“
≈PLAY
” indicator appears.
r Push [PLAY]
F-3
again to stop playback.
 •Playbackisterminatedautomaticallywhenallofthere-
corded contents in the message are played.
t Push
EXIT/SET
 twice to exit the voice recorder
screen.
F-4
REC
F-1
∫
F-2
√
Appears Adjust [MIC] control so that this
indicator reads within 100%.
F-3
PLAY
F-1

F-2
