POC-W24C-ULT3 FHD Medical Panel PC
Page 136
B.2.1 Maintenance and Cleaning
Prior to cleaning any part or component of the POC-W24C-ULT3, please read the details
below.
To clean the POC-W24C-ULT3,
o remove dirt with a lightly moistened cloth. Then wipe the external chassis
with a soft dry cloth.
o use 75% ethanol alcohol to clean the external chassis.
Cleaning frequency: follow the cleaning method guidelines of the hospital.
Except for the LCD panel, never spray or squirt liquids directly onto any other
components.
The interior of the POC-W24C-ULT3 does not require cleaning. Keep fluids
away from the POC-W24C-ULT3 interior.
Never drop any objects or liquids through the openings of the
POC-W24C-ULT3.
B.2.2 Cleaning Tools
Some components in the POC-W24C-ULT3 may only be cleaned using a product
specifically designed for the purpose. In such case, the product will be explicitly mentioned
in the cleaning tips. Below is a list of items to use when cleaning the POC-W24C-ULT3.
Cloth – Although paper towels or tissues can be used, a soft, clean piece of
cloth is recommended when cleaning the POC-W24C-ULT3.
Water/Ethanol alcohol – A cloth moistened with water or 75% ethanol
alcohol can be used to clean the POC-W24C-ULT3.
Using solvents – The use of solvents is not recommended when cleaning the
POC-W24C-ULT3 as they may damage the plastic parts.
Cotton swabs - Cotton swaps moistened with water are excellent tools for
wiping hard to reach areas.
Foam swabs - Whenever possible, it is best to use lint free swabs such as
foam swabs for cleaning.
To Next Page
Loading...
Need help?
General
