POC-W24C-ULT3 FHD Medical Panel PC
Page 30
Figure 3-11: Insert Barcode Reader Set
Step 3: Push the barcode reader set all the way down, and then rotate the barcode
reader anti-clockwise to a proper position (
Figure 3-12).
Step 4: Connect the barcode reader cable to the RJ-11 connector on the bottom panel of
the POC-W24C-ULT3 (
Figure 3-12).
Figure 3-12: Install and Connect Barcode Reader Set
Step 5: Install the driver for the barcode reader by following the instructions described in
Section
5.12.