Infinity Chimp 100 - Assigning Names to Fixtures; Assign Name Using the Fixture Pool; Assign Name Using the Command Line Interface; Using Fixture Groups

108
Infinity Chimp Series
Infinity Chimp Series
Assigning Names to Fixtures
You may decide between different ways should you wish to rename your fixtures to make them more
identifiable within the Fixture Pool, programmer and fixture configuration dialogs:
Assign Name using the Fixture Pool
● Open a Fixture Split Widget.
● Press the [Name] key.
● Select the fixture you wish to rename from within the Fixture Pool.
Assign Name using the Command Line Interface
Type [Name] followed by the fixture selection, in example: [Fixture] [1] [Thru] [5] [Enter].
Using Fixture Groups
Another approach would be to use a Group to bulk rename all fixtures in the Group.
● Open a Group Pool.
● Press the [Edit] key.
● Now, select the group that contains the fixtures to be renamed by clicking on it.
● The Edit Group Screen will be shown.
● Now click on Smart Name.
● An on-screen keyboard which will rename both, the group and all fixtures in the group will be shown
Using the Edit Fixture Window
You may also use the “Edit Fixture” –Window to rename a fixture.