Infinity Chimp 100 - DMX Input

91
Infinity Chimp Series
Infinity Chimp Series
DMX Input
To set up DMX Input, open the Setup Screen, head over to the Input Output Page and select DMX Input
from the Tabs shown in the center of the screen.
Fig. 75: DMX Input Settings
When using the DMX Input, the last available DMX Universe on the Console itself will be switched in
direction and is used as an Input.
With the DMX Input enabled, you may choose a Universe the incoming DMX Data should be merged to.
Data is merged Highest Takes Precedence.
Furthermore, you may choose to have the console hold the last received DMX Values on loss of the DMX
Signal, or to reset the input to all zero values.