Infinity Chimp 100 - Copying Presets; Moving Presets; Deleting Presets

165
Infinity Chimp Series
Infinity Chimp Series
Copying Presets
● Press the [Copy]-key
● Select the Preset you would like to copy from the pool or by using the command line interface.
● Select the destination Item.
Copying a Preset will create a new preset, wheras the new preset has no reference to the source preset.
Changing the copy will not change the original Item and vice versa.
Moving Presets
● Press the [Copy]-key
● Select the Preset you would like to copy from the pool or by using the command line interface.
● Select the destination Item.
Deleting Presets
● Press the [Delete] key.
● Then select the first Preset from the Preset Pool.
You may easily delete multiple Presets at once by using a mix of the GUI and the Numberblock:
● Press the [Delete] key followed by [Preset].
● Then select the first Preset from the Preset Pool.
● Now you may use the [+], [-] and [Thru] keys to further extend the preset selection
● Finish the command by pressing [Enter].
Note: If you keep pressing the [Delete] key while selecting items to be deleted, the console will not ask
for confirmation. This is a way to quickly delete multiple Items.
You may also hold [Shift] while pressing [Record] to cycle through the different delete modes.