Infinity Chimp 100 - Modifying the Cuelist Itself; Naming a Cuelist; Copy a Cuelist; Move a Cuelist

173
Infinity Chimp Series
Infinity Chimp Series
Modifying the Cuelist itself
Naming a Cuelist
you may label any item by pressing the [Name] key on the faceplate of the console. The commandline
will read “Name”. Now select the Item you would like to label.
You may also name the Cuelist using the Command Line:
[Name] [Cuelist] [1] [Enter]
Copy a Cuelist
Press the [Copy] key and select the Cuelist you would like to copy, followed by the destination Item.
Copying a Cuelist will create a new preset, wheras the new Cuelist has no reference to the source Item.
Changing the copy will not change the original Item and vice versa.
You may also copy the Cuelist using the Command Line:
[Copy] [Cuelist] [1] [Cuelist] [10] [Enter]
Move a Cuelist
● Press the [Move] key.
● Select the Cuelist you would like to move
● Select the destination Pool Item.
You may also move the Cuelist using the Command Line:
[Move] [Cuelist] [1] [Cuelist] [10] [Enter]
Delete a Cuelist
● Press the [Delete] key.
● Make sure Delete Object is selected on the delete Toolbar.
● Now select the Cuelist you would like to delete.
You may also delete the Cuelist using the Command Line:
[Delete] [Cuelist] [1] [Enter]
Note: If you keep pressing the [Delete] key while selecting items to be deleted, the console will not ask
for confirmation. This is a way to quickly delete multiple Items.
You may also hold [Shift] while pressing [Record] to cycle through the different delete modes.