250
29. Hotkeys
General Hotkeys
[Infinity] + [Temp] = Opens Page Directory
[Infinity] + [Open] + [S1] = Calibrate Internal Screen
[Infinity] + [Open] + [S2] = Calibrate Secondary Screen
[Infinity] + [Open] + [S4] = Restart User Interface
[Infinity] + [Skip] = Skip Backwards (In Selected Cuelist)
[Infinity] + [Select] = Clears current Selection
[Infinity] + [Off] = Releases all Cuelists
[Infinity] + [Fpg+] = Sets Fader Page to 1
[Infinity] + [EPg+] = Sets Executor Page to 1
[Infinity] + [Highlight] = Toggles Solo
[Infinity] + [Clear] = Brings back the last programmer content from before clearing
[Infinity] + [Load] = Loads all Output for currently selected fixtures
[Infinity]+ [Next] = Next’s through Multi-Instance fixtures’ instances
[Infinity]+ [Prev] = Prev’s through Multi-Instance fixtures’ instances
[Prev] + [Next] = Selects all fixtures from original selection set
[Infinity] + Encoder Turn = Sets Fine Values for this Attribute
[Infinity] + [Edit] + Fader Go / Pause Button = Opens the Settings Tab for the Cuelist
[Infinity] + [Edit] + Executor Button = Opens the Settings Tab for the Cuelist
[Infinity] + Cuelist Item in Cuelist Pool: Deselects the Cuelist
[Infinity] + Preset Item in Preset Pool: Loads the Presets Values for selected fixtures instead of a
reference to the preset.
Programmer
[Open]+ [Preset] = Cycles through attribute groups
[Infinity]+ [Open] + [Preset] = Cycles through sub attribute groups
Tables
[Infinity] (Or Shift on Keyboard) + Clicking in a Multiselect Table will select multiple Cells
[Infinity] (Or Shift on Keyboard + Arrow Keys on Keyboard will allow to make a multi selection
To Next Page
Loading...
