79
You may also select an address visually by hitting the Select Address button. This will open up a new
screen enabling you to select the address visually.
This screen will also indicate free addresses by a green color, as well as used addresses by a red color. If
you click onto one channel, the console will show you how many addresses the fixture(s) you are about
to patch will use, and if they fit.
Auto Patch
The fixtures will be patched at the next free address of the selected universe automatically. Should the
selected universe not have sufficient unused DMX channels left, Auto Patch will automatically add the
remainders that do not fit onto the next DMX Universe.
However, Auto Patch will always patch all the selected fixtures in one big block. This means that should
there not be sufficient space to patch all fixtures in between other fixtures, no fixture will be patched.
To Next Page
Loading...
