94
The Skip Counter lets this trigger skip beats, you could, for example configure it in a way it will only trigger
after every second or fourth beat.
Furthermore, the encoders are used to specify the frequence range of the trigger, as well as sound level
thresholds:
● Min.Frequency: This is the lower bound of the frequence range this trigger will listen to.
● Max.Frequency: This is the upper bound of the frequence range this trigger is active for.
● Low Threshold: This is the value the combined sound level needs to fall under after the trigger
triggered before it will trigger again of the frequence range that is selected.
● High Threshold: This is the value the combined sound level needs to reach in order to have the trigger
react to audio.
To Next Page
Loading...
