Intel FALCON 8+ - Page 106

MAINTENANCE MANUAL
INTEL
®
FALCON™ 8+ UAS
DESCRIPTION
100 © 2017 Intel Corporation. All rights reserved.
REV 00
APR 2017
Inspection Payload Control by the Intel
®
Cockpit GCS
The Inspection Payload ZS50 can be operated by using the functional elements of the Intel
®
Cockpit GCS. Refer to Section 7.3.6 Camera Controls for specific button functions.
Additionally:
 Push Button, #2, switches the camera for
live preview from the FLIR Tau 2 640
camera and the Panasonic Lumix RGB
camera.
 Rocker Switch, #4, changes its function
depending which camera is selected for
live preview. See table below.
PUSH
BUTTON (#2)
POSITION
ACTIVATED
CAMERA
ROCKER SWITCH (#4) FUNCTION
1 (LED off)
Panasonic
ZS50
Zoom in/out
Note that shooting parameters like
shutter speed, aperture and ISO need to
be set directly on the camera before take-
off.
2 (LED on/red)
FLIR
up - trigger flat
field correction
down - Cycle
through color
palette
Please note that preview parameters like
isotherms and ACG need to be set via
configuration file on the FLIR SD card
before take-off.