EasyManuals Logo

Intel FALCON 8+ User Manual

Intel FALCON 8+
233 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #137 background imageLoading...
Page #137 background image
USER MANUAL
INTEL® FALCON™ 8+ UAS
© 2018 Intel Corporation. All rights reserved 137
A motor stops working in
flight.
1. Steer the UAV with careful control commands
and avoid strong control stick inputs.
2. Carefully land the system.
3. Identify and repair the cause of the failure before
flying again.
Should one of the motors become defective, it will
be identified by the UAV and compensated for. A
visual, and an acoustical warning signal are given
and emitted from the CTR. With the notification, all
you must do is bring the UAV back and land in a safe
spot.
More than one motor stops
working in flight
If possible, immediately land the system at its cur-
rent location with careful control commands avoid-
ing strong control stick inputs. Identify and repair
the cause of the failure before flying again.
If two or more motors are lost, depending on their
position, stable flight characteristics can no longer
be guaranteed.
When sufficient thrust is missing, the system has the
following priorities:
1. Attitude
2. Position
3. Altitude
Meaning that if insufficient thrust is available, the
system will first descend. If still not enough thrust is
available, it will start drifting but still try to hold the
attitude. Only if physically impossible, the attitude of
the system will also be compromised.
Table 3.5: Operational guidelines in case of emergency (continued)
EVENT POSSIBLE ACTION

Table of Contents

Other manuals for Intel FALCON 8+

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intel FALCON 8+ and is the answer not in the manual?

Intel FALCON 8+ Specifications

General IconGeneral
TypeOctocopter
Easy to useYes
Product colorBlack, Yellow
Maximum speed16 m/s
Frequency band2.4 GHz
Number of rotors8 rotors
Maximum flight time26 min
Maximum weight capacity2.8 kg
Maximum operating distance1000 m
Maximum pitch angular velocity50 °/sec
Operating temperature (T-T)-5 - 40 °C
Transmitter power consumption100 mW
Built-in processor-
Moving control functionsBackward, Forward, Turn left, Turn right, Upward
Weight and Dimensions IconWeight and Dimensions
Depth817 mm
Width768 mm
Height160 mm
Weight1200 g
Rotor diameter203.2 mm

Related product manuals