Intel FALCON 8+ User Manual

USER MANUAL
INTEL® FALCON™ 8+ UAS
© 2018 Intel Corporation. All rights reserved 140
13.Push the arrow RIGHT button one time to select
Activate.
14.Push ENT.
The boundaries are activated. You return to the
Main Screen.
Action 2
Stay calm and fly back into the operating area. If nec-
essary switch to Height-Mode or Manual-Mode (see
“FLIGHT MODES” on page 120).
Action 3
Try to activate the RETURN TO HOME function from
the CTR to bring the Intel Falcon 8+ UAV back to
where it took off by pushing the dedicated button on
the CTR (see “Intel® Cockpit Controller (CTR) Over-
view” on page 24).
Action 4
Switch off the CTR to activate the Link Loss Proce-
dure.
Before take-off you are forced to choose one of
three Link Loss Procedures to determine the auto-
matic landing in the unlikely event that both data
links are lost: Direct landing, ComeHome
Straight
(minimum 20 m altitude or at its current
height if higher than 20 m) or ComeHome High (at
max. mission height).
For more information about the Link Loss Procedure
see “LINK LOSS PROCEDURE” on page 116).
Action 5
Force an intentional crash at an uncritical position.
All propellers will stop and the Intel Falcon 8+ UAV
will fall down.
To do so:
1. Switch to Manual-Mode.
2. Give full thrust down and simultaneously
3. Push the dedicated engine START/STOP button
on the CTR for about one second.
Table 3.5: Operational guidelines in case of emergency (continued)
EVENT POSSIBLE ACTION

Intel FALCON 8+ Specifications

General

Type	Octocopter
Easy to use	Yes
Product color	Black, Yellow
Maximum speed	16 m/s
Frequency band	2.4 GHz
Number of rotors	8 rotors
Maximum flight time	26 min
Maximum weight capacity	2.8 kg
Maximum operating distance	1000 m
Maximum pitch angular velocity	50 °/sec
Operating temperature (T-T)	-5 - 40 °C
Transmitter power consumption	100 mW
Built-in processor	-
Moving control functions	Backward, Forward, Turn left, Turn right, Upward

Weight and Dimensions

Depth	817 mm
Width	768 mm
Height	160 mm
Weight	1200 g
Rotor diameter	203.2 mm