Intel SC5299WS User Manual

Hardware Installations and Upgrades
Intel® Entry Server Chassis SC5299-E DP/WS/BRP User Guide 13
Removing and Installing the Front Bezel Assembly
All configurations of the Intel
®
Entry Server Chassis SC5299-E ship with a two-piece
front bezel assembly.
Removing the Front Bezel Assembly
1. Observe the safety and ESD precautions listed in Appendix A, “Safety Information”.
2. Turn off all peripheral devices connected to the server. Turn off the server.
3. Disconnect the AC power cord.
4. Remove the left side cover. For instructions, see “Removing the Left Side Cover”.
5. Disengage the two bezel tabs from the left side of the chassis (see letter “A” in the
following figure). Rotate the left side of the front bezel assembly outward slightly (see
letter “B”). Disengage the three clips that attach the right side of the front bezel
assembly to the chassis and remove (see letter “C”).
Figure 11. Removing Front Bezel Assembly
TP02034
C
B
C
C
A
A

Intel SC5299WS Specifications

General

Brand	Intel
Model	SC5299WS
Category	Chassis
Language	English