Intel SC5299WS User Manual

Hardware Installations and Upgrades
Intel® Entry Server Chassis SC5299-E DP/WS/BRP User Guide 31
11. Plug all peripheral devices and the AC power cable(s) into the server. Power up the
server.
Installing or Removing a DVD-ROM or CD-ROM Drive
Caution: CD-ROM and DVD-ROM drives are NOT hot swappable. Before removing or replacing
the drive, you must first take the server out of service, turn off all peripheral devices
connected to the system, turn off the system by pressing the power button, and unplug the
AC power cord from the system or wall outlet.
Installing a DVD-ROM or CD-ROM Drive
1. Observe the safety and ESD precautions listed in Appendix A, “Safety Information”.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the left side cover. For instructions, see “Removing the Left Side Cover”.
4. Remove the front bezel assembly. For instructions, see “Removing the Front Bezel
Assembly”.
5. Remove the EMI shield from the 5.25-in device drive bay (see letter “A” in the
following figure). Move latch to the “unlock” position (see letter “B”).
Figure 35. Removing 5.25-in Drive EMI Shield
TP01063
A
B

Intel SC5299WS Specifications

General

Brand	Intel
Model	SC5299WS
Category	Chassis
Language	English