Chapter 18: Using the web browser
150 TruVision NVR 11 User Manual
Figure 37: Remote browser configuration window (Camera Setup > IP Camera Status window
shown)
Table 17: Description of the Remote configuration windows
Menu Function Description
OSD Display
Settings
Display Define the resolution of the monitor.
Camera Setup IP Camera Status Search and add IP cameras. See “IP camera status” on
page 66 for further information
PoE Setup Track the PoE power consumption. See “PoE setup” on
page 70 for further information.
IPC Import/Export Import and export the IP camera configuration information.
See “Importing/exporting IP camera files” on page 70 for
further information.
Camera Recording
Settings
Define the general camera settings such as camera name,
stream record mode, resolution, frame rate, stream type,
video encoding, and pre and post event times. See “Camera
OSD” on page 74 for more information.
Snapshots Define the image quality and resolution of snapshots. See
“Snapshots” on page 74 for further information.
Camera OSD Define which information is displayed on-screen. See
“Camera OSD” on page 74 for further information.
Motion Detection Define motion detection parameters. See “Motion detection”
on page 76 for more information.
Privacy Mask Define the on-screen privacy mask areas. See “Privacy
mask” on page 78 for more information.
Camera Tamper Define the video tampering detection settings. See “Camera
tamper” on page 79 for more information.
Text Overlay Define the text to be added on-screen to display extra
information, such as contact information. This text is
embedded in the video and cannot be removed.
To Next Page
Loading...
Need help?
General
