Chapter 18: Using the web browser
TruVision NVR 11 User Manual 151
Menu Function Description
This can only be defined via the browser.
Image Configuration Define the brightness, contrast, saturation, and hue values
of the image. See “Image settings” on page 75 for more
information.
BNC/V-stream Define the V-stream parameters. See “V-stream encoding”
on page 87 for more information.
Restricted Access
Camera
Define which cameras can be seen on the monitor. See
“Restricted access camera” on page 79 for more
information.
VCA VCA Define an area on screen to enable a VCA alarm from IP
cameras. See “VCA setup” on page 80” for further
information.
Network Settings Network Settings Define the general network settings. See “Network settings”
on page 88 for more information.
PPPoE Define the PPPoE settings. See “PPPoE settings” on page
90 for more information.
DDNS Define the DDNS settings. See “DDNS settings” on page 91
for more information.
NTP Define the NTP server settings. See “NTP server settings”
on page 92 for more information.
Email Define the settings to send an email. See “Email settings”
on page 92 for more information.
FTP Define the FTP settings. See “Configure an FTP server to
store snapshots” on page 93 for more information.
SNMP Define the SNMP settings. See “SNMP settings” on page 94
for more information.
Network Storage Define the type and location of the network storage system.
See “Add a HDD” on page 127 for further information.
UPnP Enable this function so that the recorder can automatically
configure its own port forwarding. See “UPnP settings” on
page 94 for more information.
HTTPS Define self-signed server certificates as well as request
certified server certificates to ensure your network security.
See “HTTPS settings” on page 142 for further information.
Network Statistics Check the bandwidth being used by remote live view and
playback. See “Network statistics” on page 97 for more
information.
IP Address Filter Define the list of forbidden or allowed IP addresses that can
be accessed by the recorder. See “Filter IP addresses” on
page 97 for more information.
Recording Recording Schedule Define the recording schedules. See “Recording schedule”
on page 99 for more information.
Manual Recording Define which cameras can manually record. See “Manual
recording” on page 103 for more information.
To Next Page
Loading...
