Interroll MultiControl

Description of the control programs
Operating and Programming 23
5.1 ZPA Single Release
For Single Release the removal is done in individual zones („ZPA Single Release 1 Zone“ to „ZPA
Single Release 4 Zone“).
Free RollerDrive connections can be used as slave motors according to the table (PII Motor
States).
Timer
ID
Description
Default [ms]
T1
Connection monitoring
200
T2
Internal conveyed items monitoring
4000
T3
Follow-up time RollerDrive
5000
T4
Error reset
1000
The parameter "Timer 1 - Connection monitoring" should not be changed.
In addition to the explanations of the control programs, the corresponding process
images are listed below.