Service Manual
Storm³
As at: 07.03.02 Page 9
2 Tool list
You will need a standard tool set with at least the following:
• set of open and ring spanners (6 – 24 mm)
• set of Allen keys (1.5 - 10 mm)
• torque wrench (commercial)
• socket spanner set
• set of screwdrivers (0.5 - 1.6 mm)
• oblique pliers
• flat-nosed pliers
• circlip pliers
• pointed pliers
• cable lug pliers
• wooden or plastic hammer
• tyre repair kit (commercial)
• tyre pressure indicator
• valve removal tool
• wheel bearing puller
• Multimeter with probes and various cable clips
• soldering iron 30 W
• front wheel hub puller (available from INVACARE Service)
• circlip pliers for star lock caps (commercially available, make Tigtemeyer)
• pop riveting tool
• stepped mandrel
To Next Page
