Invacare Storm 3 - Replacing the Footrest Hanger, Interlock, Lift Motor

Service Manual
Storm³
As at: 07.03.02 Page 83
10 3 Z173189.99 NUT M6 SP-14
- 1 SP1423201 MOUNTING SET RELEASE LEVER FOR BST
ELECTRICAL HV
11 1 Z174113.99 LOCKING ROD
12 1 Z174137.99 PINTLES
13 1 Z174112 RELEASE LEVER (AD)
14 1 Z173177 CLASP LEVER
15 1 Z174134 SLIDING CYLINDER
16 3 J10094 STRAIGHT PIN RD. 8 X 36. DIN-7
17 1 Z173178 TENSION SPRING
18 1 N12196 PRESSURE SPRING
19 1 Z174111 LEG SUPPORT SHELL (AD) LH
20 1 Z174110 LEG SUPPORT SHELL (AD) RH
21 1 Z174174 PROTECTOR BOTTOM
22 1 Z174175 PROTECTOR TOP
23 1 Z174135.89 MOTOR RECEPTACLE
24 1 4000665 SPACER LINING
25 1 Z174162 KNEE CUSHION (ADM) LH
26 1 Z174172 KNEE CUSHION (ADM) RH
27 1 Z173205-9005 FOOTREST UPPER PART ADP
28 1 SPZ174164 CALF PLATE PREASSEMBLED
14.5.1 Replacing the footrest hanger, interlock, lift motor
Always compare the position numbers with the appropriate
drawings!
• Unscrew cylinder head screw (9).
• Unscrew cylinder head screw (5 ).
• Remove right-hand footrest hanger shell (14).
• The locking lever (18), tension spring (21), release lever
(17) or lock bar (11) can now be replaced.
Reassembly takes place in the reverse order.