Service Manual
StormĀ³
As at: 07.03.02 Page 3
Contents
1 SAFETY AND ASSEMBLY INSTRUCTIONS 7
1.1
Before any inspection or repair work 7
1.2
During dismantling/reassembly 7
1.3
Before operation / after completion of work: 8
2 TOOL LIST 9
2.1
Tightening torques and Loctite 10
3 LAYOUT OF MODULES, COMPONENTS AND DISPLAYS AND
CONTROLS 11
4 SERVICE PLAN (1X ANNUALLY) 12
5 OPERATIONAL FAULTS 14
5.1
General 14
5.2
Fault causes 14
6 JOYSTICK BOX ERROR CODES 16
7 MODULE COMPOSITION / VARIATIONS 17
8 RUNNING GEAR 18
8.1
Frame (chassis) 18
8.1.1 Service work to frame (chassis) 19
8.2
Lifter 20
8.2.1 Replacing motor for electrical seat tilting 21
8.2.2 Replacing the electrical lifter motor 21
8.2.3 Replacing the gas pressure spring for lifter support 22
8.3
Drive unit, disengage lever, support wheels 23
8.3.1 Drive unit 23
8.3.2 Replacing drive unit, pressure spring 25
8.3.3 Replacing carbon brushes 25
8.4
Disengage lever 26
8.4.1 Replacing the disengage lever 27
8.4.2 Function check for disengage lever 28
8.4.3 Replacing the support wheels 28
8.5
Wheel lock 29
8.5.1 Replacing wheel lock / Bowden cable 30
To Next Page
Loading...
