iPECS UCP - About this Manual

iPECS UCP
Hardware Description and Installation Manual Issue 1.3
3
1.2 About This Manual
This document provides general information covering the description and installation of the
iPECS UCP System hardware. While every effort has been taken to ensure the accuracy of this
information, Ericsson-LG Enterprise makes no warranty of accuracy or interpretations thereof.
The document is divided into eight (8) sections as described in the following.
Section 1 Introduction
This section introduces important safety information and the manual.
Section 2 System Overview
This section provides general information on the iPECS UCP System, including the system
specifications and capacity
Section 3 iPECS UCP Hardware Description
This section describes the hardware components of the iPECS UCP.
Section 4 Installation overview
This section gives detailed instructions for planning the installation site and procedures to
install the iPECS UCP System.
Section 5 Module Mounting Hardware Installation
This section describes installation of the Module mounting hardware with step-by-step
instructions.
Section 6 Module Installation and Wiring
This section provides instructions on wiring the individual Modules, installing Module option
boards, and wiring for the Main Cabinet, as well as Miscellaneous connections, Earth
Grounding and Battery Backup.
Section 7 Terminal Installation and Wiring
This section describes the various terminals, maximum wiring distance, and other device
connection information for the terminals.
Section 8 Open Source Software Notice
This section provides information on open source software