ITW SIMCO ION Manager IQ Easy User Manual

ManagerIQEasy_UM_9752103002_GB_V3_1 36
Click (Stand-by) to put a single Device or the whole system (all Devices) in Standby mode.
Click (Run) to set a single Device or the whole system (all Devices) to Run mode
Parameter screen
Button
Button
HMI
Put all Devices in Standby.
Put all Devices whose
parameter “Autorun” is set to
“Yes” in Running.
Backplane / Extension IQ
Easy
N/A
N/A
Device
Put the Device in Standby.
Put the Device in Running.
Click (EditMode) to change the parameter. The tab (Information) will also
change to (Settings).
Press (Info) to return to the (Read-only) or (Information) mode. The parameters and
settings can no longer be changed. The tab (Settings) will also change to
(Information).
The parameter screens usually consist of multiple pages. Press and to scroll between
the different pages. The current page is displayed between the two buttons and also the total
number of available pages (e.g. means page 3 of a maximum of 6 pages).
To make it easier and faster to browse between the different pages, there are 2 invisible buttons
available in the parameter screen. In the following image, the areas of these fields are marked in red.

ITW SIMCO ION Manager IQ Easy Specifications

General

Brand	ITW
Model	SIMCO ION Manager IQ Easy
Category	Control Unit
Language	English