EasyManuals Logo

JRC ECDIS User Manual

JRC ECDIS
370 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #180 background imageLoading...
Page #180 background image
Appendix A Alert and Maintenance INFO List A-28
Message Explanation Advice
VDR(Communication
failed, Main LAN)
Communication with VDR
cannot be performed via
Main LAN.
Check the condition of VDR and Main LAN.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
VDR(Communication
failed, Sub LAN)
Communication with VDR
cannot be performed via
Sub LAN.
Check the condition of VDR and Sub LAN.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
Water
Thermometers(Commun
ication failed, Main LAN)
Communication with
Water Thermometer
cannot be performed via
Main LAN.
Check the condition of Water Thermometer
and Main LAN.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
Water
Thermometers(Commun
ication failed, Sub LAN)
Communication with
Water Thermometer
cannot be performed via
Sub LAN.
Check the condition of Water Thermometer
and Sub LAN.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
Wind(invalid)
There is a format error or
a status error of the Wind
data.
Check the sensor condition. Switch to a
sensor in good condition, if available.
Wind(not plausible)
There is a range error of
Wind data.
Check the sensor condition. Switch to a
sensor in good condition, if available.
Wind(unavailable) The Wind data cannot be
received.
Check the condition of the sensor and the
communication path. Switch to a sensor in
g
ood condition, if available.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JRC ECDIS and is the answer not in the manual?

JRC ECDIS Specifications

General IconGeneral
Display TypeLCD
Radar OverlayYes
AIS IntegrationYes
Operating Temperature-15°C to +55°C
Chart FormatS-57, S-63
Power Supply24V DC
InterfacesEthernet, USB
ComplianceIMO

Related product manuals