JRC ECDIS - Page 333

B-153 Appendix B Menu List and Materials
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
APP B
24
25
27
APP C
No. Name Functional outline Displayed image
28 Standard List Closes the expand mode TT/AIS list
(separate window), and displays in
the standard mode (information
monitoring window pane)
29 Standard AIS Changes to standard AIS display.
30 Expand AIS Changes to expanded AIS display.
31 Route
Planning
Opens the dialog box for preparing
the route.
Route preparation is done by editing
the table and graphic editing using
the cursor.
32 Route
Monitoring
Opens the dialog box for route
monitoring.
When a route is selected, displays the
information up to the next target
location, and monitors whether the
own ship is traveling according to the
route.
33 Anchor Watch Monitors the anchor dredging.
When the anchor has been lowered,
monitors if the ship is being swept
away
34 Auto Sail Starts auto sail.
Before starting, a safety check of the
route is made, and the result is
displayed.
35 Chart Opens the Chart related menu.
36 User Chart Opens the user chart related menu.
It is possible to write marks or lines in
the user chart.
37
Logbook Opens the dialog box of the Logbook.
The ship’s position, speed, direction,
wind direction, wind speed, etc., are
recorded at specific intervals of times,
or records events that have occurred
in the equipment.
38
TT/AIS Opens the TT/AIS related menu.
This also has the function of
highlighting the display of the TT/AIS
symbol depending on the conditions,
or the function of sending a message
to an AIS ship, etc.
39
Tools Tool related menu, such as the range
and bearing measurement EBL/VRM
or PI, etc.