Chapter 5 VARIOUS FUNCTIONS
1
5.5 RADAR TRAILS
Radar Trails is can be used to figure out how well you can navigate an obstacle and how well you can keep
the bearing that have set for your ship.
The echo trail is displayed on the radar display screen so you can easily assess visually what is going on.
5.5.1 SETUP THE RADAR TRAILS INTERVAL
You can be selected in the range of Trail Length set by Max Interval.
For Max Length of settings, see "8.2 TRAILS.”
Short 㸸 OFF/15sec/30sec/1min/2min/3min/4min/5min/6min/10min/15min/Continuous
Middle 㸸 OFF/30sec/1min/2min/3min/4min/5min/6min/10min/15min/30min/Continuous
Long 㸸 OFF/1min/2min/3min/4min/5min/6min/10min/15min/30min/1hour/Continuous
Super Long㸸 OFF/30min/1hour/2hour/3hour/4hour/5hour/6hour/10hour/12hour/24hour/Continuous
Settings Radar Trails interval
Press
Press
Turn
By turning the MULTI control in the Radar Trails
menu, you can change the radar trails length.
Press the multi-knob to set the radar track length. setting.
Select "Off" if you do not want to display the radar trails.
To Next Page
Loading...
Need help?
General
