Chapter 5 VARIOUS FUNCTIONS
4
Press Turn Press
Turn for
adjustment
of bearing
Turn while
pressing for
adjustment of
interval
Press the MULTI control or press the ENT button to
confirm the adjustment of the parallel line cursor
Chapter 5 VARIOUS FUNCTIONS
5.1 PARALLEL CURSOR FUNCTION
Parallel Cursor is straight lines at equal interval that are displayed on the screen.
By using Parallel Cursor lines, complicated measurement is enabled relating to the bearing and the range by
using the own ship’s position as the reference point.
Adjustment of Bearing/Interval
OR
To Next Page
Loading...
Need help?
General
