JRC JMA-3400 Series - Buzzer

Cha
p
ter 8 DETAIL PERFORMANCE SETTINGS
1
6
4
8.6 BUZZER
You can adjust the buzzer volume.
It sets the buzzer volume.
The “0” is muted.
Note
㸸
If set to "0", you may be delay that realize the danger of
the capability. And you may be mistaken not to run
functions. Please set by considering enough.
Turn on/off the buzzer in
" External " .
䐠 Input "0" and press ENT button.
䐢 Select each setting item.
䐟 Long press the MENU button.
䐡 Select "Buzzer".
External
Setting the buzzer volume
Select each setting item.
* Press the cross key or
turn the
MULTI control
to set the value.