Chapter 5 VARIOUS FUNCTIONS
72
Add/Remove the Mark
The Mark function memorizes the position using latitude and longitude. GPS position information signal must
be input. Therefore, this function cannot be used unless GPS is input.
If change the size, color, or type of the mark, see “5.29 MARK SETTING.”
Press Press
Press
Press
Turn
Turn
or
Cross Key
If select “Insert”, a mark can
be added.
If select “Remove”, the
cursor shape changes select
cursor.
Move the cursor on the
mark, then cursor changes
eraser icon.
The mark can be removed.
To Next Page
Loading...
