JRC JMR-5400 Series User Manual

6-23 Section 6 Settings
5
6
To delete user preference
1 Select a user preference you want to delete and click on [Delete] button.
A confirmation dialogue is displayed. Up to 64 characters can be displayed for the file name. An
ellipsis [...] is added to the end if the text is longer than the field width.
2 Click on the [OK] button.
The user preference is deleted.
To cancel the deletion, click on the [Cancel] button.
Configuring the default display setting
1 Click on the [Default display configurations] button.
A confirmation dialogue is displayed.
2 Click on the [OK] button.
The factory default display configuration is restored.
To cancel the change, click on the [Cancel] button.
Setting items and default settings of user preference
The following table lists the setting items and default settings of user preference with the optional
plotter installed.
Plotter mode
Save item
Preference to be saved
Default setting or
value after [Default
display configurations]
is clicked on
Location Item
Range
Plotter screen
- Chart Information
area
Either selected scale or
selected range
Range 3 NM
Orientation
Plotter screen
- Chart Information
area
- Motion mode
- Direction mode
True motion
N-UP
TM reset position
Position
Sensor
Plotter screen
- Ship information
or
Maintenance screen
- Sensor Selection
Position source GPS 1

JRC JMR-5400 Series Specifications

General

Brand	JRC
Model	JMR-5400 Series
Category	Marine Equipment
Language	English