JRC JMR-5400 Series - Page 31

2-5 Section 2 Basic Operations and Mode Screen
2
Sensor information
Sensor information is displayed.
Sensor type
Sensor name
Description
HDG
Displays the value of the heading direction sensor.
STW
Displays the value of the water speed sensor.
COG/SOG
Displays the value of the ground speed sensor.
Background colours for sensor values
The meanings of the background colours are as follows.
Normal: Indicates a normal sensor value.
Yellow: The reliability of the sensor value is low.
Yellowish orange: The sensor value is abnormal.
Switching the sensor source
Select a sensor source from the [Source] combo box. The following sensor sources can be selected.
Select [Menu...] to display the [Sensor Selection/Status] dialogue.
Sensor name
Sensor source
HDG
Manual, Gyro, Gyro 1
*1*4
, Gyro 2
*1*4
, MAG (MAG Compass)
*4
, G/C (GPS Compass)
STW
Manual, Log
*5
, Log 1
*2*5
, Log 2
*2*5
COG
Log
*5
, Log 1
*2*5
, Log 2
*2*5
, GPSx
*3
SOG
*1: Only with two gyrocompasses
*2: Only with two logs
*3: "x" indicates a device number if more than one GPS is used.
*4: If a gyrocompass system with the automatic switching feature is used, the sensor source display is
automatically changed depending on the switching status.
*5: Logs with 1AX installed cannot be selected from the sensor source.
UTC/Local date and time
The current date and time are displayed.
Click on it to switch between the UTC time and the local
time.
From the menu, select [Maintenance] - [Date/Time/Time
Zone] - [Display Style] to configure the date format.
For details of configuring the data and time, see the
Instruction Manual of the ship radar equipment.
See the next page.