JRC JMR-5410-6X - Page 96

Section 2 Name and Function of Each Unit 2-6
[Sensor types]
Sensor name
Contents
HDG
Displays the value indicated by the ship’s heading sensor.
STW
Displays the value indicated by the speed through water sensor.
COG/SOG
Displays the value indicated by the speed over the ground sensor.
[Sensor value background colours]
Each background colour represents the following meaning.
Normal colour: Normal sensor value
Yellow: The reliability of the sensor value is deteriorating.
Yellowish orange: The sensor value is abnormal.
[Switching the sensor source]
Select the sensor source in the [Source] combo box. The following sensor sources can be selected.
When [Menu] is selected, the [Sensor Selection/Status] dialogue is displayed.
Sensor name
Sensor source
HDG
MAN (Manual), Gyro, Gyro 1
*1*4
, Gyro 2
*1*4
, MAG (MAG Compass)
*4
, G/C (GPS Compass)
STW
MAN (Manual), Log, Log 1
*2*5
, Log 2
*2*5
COG
Log, Log 1
*2*5
, Log 2
*2*5
, GPSx
*3
, TGT, CORR
SOG
*1: Only when there are two Gyros.
*2: Only when there are two Logs.
*3: When two or more GPS units are present, “x” indicates the unit number.
*4: When the gyro compass system equipped with the automatic switching function is used, the display of the
sensor source changes automatically according to the switching condition.
*5: When 1AX is installed in Log, Log cannot be selected from the sensor source.
UTC/Local date and time
This button displays the current date and time.
• When the button is clicked on, the time can be
switched to the UTC time display or Local time
display.
• Set the time format by selecting [Maintenance] -
[Date/Time/Time Zone]-[Display Style] on the
menu.
For the details, refer to "15.1.1 Setting
Date/Time/Time Zone".
See the next page.
Sensor information
Various sensor information items are displayed.