JRC JMR-5410-6X - Page 97

2-7 Section 2 Name and Function of Each Unit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
1
[1] The data name of POSN is displayed.
[2] The sensor source of POSN is displayed.
Select a sensor source in the [Source] combo box. Any of the following sensor sources can be selected.
When [Menu] is selected, the [Sensor Selection/Status] dialogue is displayed.
Data name
Sensor source
POSN
GPSx
*
*: When two or more GPS units are present, “x” indicates the unit number.
[3] The Geodetic Positioning System of POSN is displayed.
[4] Positioning precision display of POSN
When the positioning precision is differential positioning, "DGPS" is displayed. No information is displayed
in the case of GPS single positioning.
[5] POSN (CCRP) position
The CCRP position indicated by the primary positioning sensor is displayed.
[6] Badge display area
Offset : This badge is displayed, when offset is set for own ship’s position.
AFT : This badge is displayed, when AFT Operation is enabled.
EBL/VRM : This badge is displayed, when EBL/VRM cursor mode is enabled.
V : This badge is displayed, when GPS Buoy mode is enabled.
[1]
[2]
[3]
[4]
[5]
See the previous page.
POSN
Displays the POSN information.
[6]