3-51
3
Step Operation IME/DTE Response Remarks
19
• Confirm each parameter
and press
F1 (“Send Call”)
key.
• The Main menu is
displayed.
• Normally, it takes about
3-5 minutes to complete
the communication.
20
• “S&F message (96-01-15
11:00) sent to LES
(203)” is displayed.
Example: Call date and
time:
1996/1/15
11:00
LES ID: 203
• When the message print
on function is turned on,
the call time, date
destination number, LED
ID is displayed.
• Press
F10 (“previous”)
key to clear the
message.
21
• “S&F message (96-01-15
11:00) delivered to
subscribers
(11121234567)” is
displayed.
Example: Delivery date
and time:
1996/1/15
11:00
Destination number:
11121234567
• When the message print
on function is turned on,
the call time destination
number and LES ID are
displayed.
• Press
F10 (“previous”)
key to clear the
message.
Note 1) Message can be sent to up to five subscribers whom destination code is same, by moving the
cursor to “Destination code-subscriber’s number and answerback code” then pressing
Enter key. When the subscriber’s number set to 2 numbers or more, “*” is displayed at right
side of the number.
Note 2) When the file is not in the IME/DTE memory or the USB drive, the following window is
displayed, press
F10 (“Previous”) key and type the new file name.
Fig.3.8.4b “ERROR” Window
ERROR
The file is missing.
Confirm the file name.
F10:Previous
To Next Page
Loading...
