3-67
3
• Starting date and time
Set the date and time you want to start for a scheduled
transmission.
• Requesting interval
Set the interval time of schedule. (Minimum 10 minutes)
• LES
Set the LES IDs you want to use, in all ocean regions.
The first field is West AOR (000-063), the second field is
East AOR (100-163), the third field is POR (200-263) and
the fourth field is IOR (300-363).
• Network type
Set the network type you want to use. You can choose
one of the following networks:
• E-mail
• Telex
• PSTN
• Facsimile
• PSDN (Data transmission)
• Closed network.
• Special access.
• Destination code & subscriber’s number
Set the destination code and subscriber’s number.
• Character code
Set the character code you want to use over the satellite
link.
• Data type
Set the data type you want to send.
You can choose the following messages:
• Position data (QTH):
Choose the on or off of the position data transmission,
Position data is automatically updated when navigation
equipment (GPS, etc.) is connected. Use the
information you inputted at the section of “Distress”
when no navigation equipment is connected.
• Data source (dS)
* “1” and “2” means data source number.
E-mail
Telex
pstN
Facsimile
psDn
Closed net (dnid)
Special access
To Next Page
Loading...
