JRC jue-87 - Page 133

3-73
3
Fig.3.9d Example of “EGC Message list (Delete)” Window
Fig.3.9e Example of “Message” Window
* When the received message in the data communication is read out, the following window is displayed.
In this case, press
F10 (“Previous”) key, and press F6 (“save as”) key to save the message in the
IME/DTE memory. When the message is read out, use the “edit Ascii file” command in the “Edit”
window.
Fig.3.9f “Warning Window” is Displayed When A Message is Received in Data Communication
Fig.3.9g “Warning Window” is Displayed When Calls are Stored Over 90
No. Date Time Priority Size Service
1. 05-01-01 01:12 Routine 1000 Group call
2. 04-12-02 01:10 Safety 1001 Urgency message, NAV warning
3. 04-11-30 01:33 Urgent 1002 INMARSAT system message
4. 04-10-22 01:41 Distress 1003 Coastal warning
5. 04-09-20 01:55 Routine 1004 Shore-ship distress alert
6. 04-05-30 01:22 Safety 1005
7. 03-12-24 01:08 Distress 1006 Urgency message, MET/NAV warning
8. 03-05-03 01:07 Routine 1007 Group call
9. 03-01-06 01:09 Distress 1000 Download group identity
10. 02-10-30 01:24 Distress 1000 Coastal warning
↑↓ contd.(total : Residual : Kbytes)
Space:Select/Unselect F2:Select all F7:Delete F10:Previous
*
*
EGC Message list (Delete)
Asterisk marks (*) are
displayed when you select the
messages by pressing “Space”.
Transmit read-Out Edit call-Log Distress Ncs/les-info receive-Mode egC
Position: N 35 41' E 139 34' Course: 011deg Speed: 00.0kt at 02:41(UTC)
Ready Rec(AORW): Good-15 Msg print USB 28 Jan,10 10:28(UTC)
Inm-
C
Description : 08-02-25 01:53 Safety 200 40962 003
Date Time Priority Size Msg. no. LES
Warning
Can not display binary text.
F10: Previous
Warning
Print out call log.
F10: Previous
Inm-C
Receptionmessage list
No. Date Time Priority Size Service(* : EGC message)
Reception message <Ia5 08-02-25-01:53>
Message
F5:Print out F6:Save as F10:Previous
read-Out
°°