JRC jue-87 - Page 196

4-18
INFORMARION message Countermeasure
Now printing. Please wait. When the display doesn't disappear, the
breakdown of the printer is thought. In
this case, please OFF/ON it the power
supply of the printer.
Now reading data. Please wait Do not remove a diskette during data
reading.
Performance test failed.
Please turn off Security Button for real Security Alert.
Previous request (144, 92-04-14-08:10) is cancelled with
new request.
Really quit without saving? [Yes] [No] Select [Yes] to save the data.
Request (144, 92-04-14-08:10) cancelled.
Request (144, 92-04-14-08:10) failed. Retry transmission.
Request (144, 92-04-14-08:10) failed. Automatic request
will be re-sent in 5minutes.
Request (92-04-14-08:10) failed. Now retrying to request. Wait until re-transmission is completed.
Request (144, 92-04-14-08:10) queued. Now waiting for
announcement.
Wait the announcement from LES.
Carry out "cancel call" of "Transmit"
when you close down the call request.
SB test is incomplete. Confirm ALL SBs are OFF. Turn
off IME and DTE.
------ Security Button Test ------
Now security button testing．．．．．
If real security alert to be sent, cancel the test mode.
------ Security Button Test ------
Security button test succeeded.
If real security alert to be sent, cancel the test mode.
Sending Distress Alert to alternative NCS.
Sending Distress Message.
S&F message (92-04-14-08:10) delivered to subscribers
(072123456, 07202822351)
S&F message ( ) No delivered.
S&F message (92-04-14-08:10) sent to LES (144). To receive the notification of delivery to
other party, make "Delivery
Confirmation" to "ON" at "Transmit"
window.
The attached USB drive has malfunctioned, and DTE does
not recognize the attached USB drive.
Connect the USB drive again. If the same
window is displayed, the USB drive
might have a failure. Connect another
USB drive.
The attached USB drive is not supported. DTE supports
the USB drive only.