JRC jue-87 - Page 84

3-24
Function Step Operation Example
1
• Press F7 (“Quit”).
F7 (“Quit”)
Exit Edit without Saving
File
2
• When “Really quit without
saving? Yes No” is displayed,
select “Yes” for finishing the editing
without saving or “No” for
returning the editing to save the file.
1
• Press F8 to save the edited file as
another file.
Input save file name
Name:
F8 (“Save As”)
Saving edited file as
another file
2
• Enter a new file name
• Note 1
F9 (“Save & Quit”)
Storage of Editing File on
the USB drive & Exit
Edit
1
• Press F9 (“Save & Quit”)
F10 (“-Others-”)
Switch of Command Sets
1
• Press F10 (“-Others-”) to switch
the command sets to the group B.
Note 1) When F8 key is pressed, then the new file is created in File list.
NOTE
“Edit” has two modes for character editing, ‘overwrite’ mode and ‘insertion’ mode.
These two modes can be alternately selected by pressing F1 (“Insert Off” / “Insert On”).
When “Edit” is started, ‘overwrite’ mode is selected automatically. Once F1 is pressed, “Edit” enters
‘overwrite’ mode then “‘overwrite’ appears at the right end of the third line.
In ‘overwrite’ mode, a character on the cursor is overwritten with the character typed-in from the
keyboard.
In ‘insertion’ mode, a character typed-in is inserted before the cursor and “Insert On” appears at the
right end of the third line.